14 Pin Electric Start Remote Control Side Mount with 15 Ft. Harness
This control has a handle mounted power trim switch and a 15 ft. (4.58 m) harness with 14 pin Deutshe connector and will direct connect to the engine models below without the use of an adapter harness. This control is not for usewith engines that have counter-rotating lower units.
8‑9.9 HP 4 Stroke engines generation change above Serial # OR192772 and newer 15/20 HP 4 Stroke engines will useGen I series throttle/shift cables. 2006 25‑300 HP 4 Stroke - Any engine that has the 14 pin connector from the primary harness.
Handle can be mounted on port or starboard side of control box