Deluxe Trim Tab Kit
129E
Tab Size 12" X 9" for Boats 15'-19'
Decreases the time in "transition mode" between displacement and planing. Reduces fuel consumption, engine labor, wake and pounding. Increase speed and improve visibility and handing. Hydraulic tabs can also improve listing from one side to the other due to increased load of gear and/or passengers.
Contains Installation instructions, two Stainless Steel tabs (12"x9"), Two actuators, Hydraulic Power Unit,Euro-Style Rocker Switch all necessary wiring, tubing and hardware for installation.
General Guidelines
These sizing recommendations are based on average performance. Your choice may vary based on power, engine configuration, weight distribution, type of boat, and use. The greater the surface area, angle of deflection and/or speed of the water flowing under the trim tab, the greater the lift.
Need Help Choosing the Correct tabs?
Provide the Following info....
Boat Length, Engine Configuration, Span X Chord
Span = side to side measurement Chord = fore to aft measurement
As a rule, choose at least one inch of trim tab span (per side) for every foot of boat length.
Examples: 22-foot boat = no less than 24" x 9", 36-foot boat = no less than 36" x 9"
Bennett Trim Tab systems in the United States carry a five (5) year limited warranty against manufacturing and workmanship defects. Bennett electronics (Tab Position Indicator, Auto Tab Control, Electronic Indicator Control and Auto Tab Retractor) carry a three (3) year limited warranty against manufacturing and workmanship defects.
Please Note:Damage to the trim tabs due to electrolysis is not coveredby warranty. No labor costs of replacement, haulout, or miscellaneous charges are covered. Contacting Bennett Marine first may save considerable time, trouble and expense.
Product Code: 219-129E
